Back To Top

Course List (Public)

Course Icon
Constellation - Technologies & Standards

SP4510

Online course

This course is an introduction to Constellation, a Building Edge Infrastructure extending power & data services from the Equipment Rooms to Zones to support prominate devices.

  • Estimated study time: 40 Minutes
  • Overall content duration: 30 Minutes
Course Icon
Constellation - Positioning

SP4520

Online course

This course is designed to show students how to position Constellation and the typical envionments it is best suited to.

  • Estimated study time: 35 Minutes
  • Overall content duration: 25 Minutes
Course Icon
Structured Cabling Infrastructure Design ACT III

SP3000

Online course

This is the structured cabling design course for CommScope's NETCONNECT /Uniprise product range of components. It is also known as ACT III and usually taken after completing the ACT I and ACT II courses.

  • Estimated study time: 4 hours 30 minutes
  • Overall content duration: 4 hours
Course IconSmall BICSI iconSmall CommScope passport iconSmall ACT passport icon
Course Icon
SYSTIMAX Design and Engineering

SP3321

Online course

This is the foundation Design and Engineering course for SYSTIMAX solutions. It supports the SYSTIMAX warranty and provides a platform for infrastructure designers to continue on with specialized design courses.

  • Estimated study time: 10 hours
  • Overall content duration: 9 hours
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
SYSTIMAX MasterClass D&E and I&M Recertification

SP3351

Online course

The course combines the recertification material for both D&E and I&M courses for you to re-qualify in your original discipline. Its focus is the latest SYSTIMAX Design and Installation changes and important revisions.

  • Estimated study time: 7 hours 42 minutes
  • Webcast duration: 4 hours 48 minutes
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
SYSTIMAX Installation and Maintenance

ND3361

Classroom course

This classroom hands-on course teaches students the required SYSTIMAX termination and testing best practices and procedures. Allows approved Partner students to warranty SYSTIMAX sites for installation.

Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
SYSTIMAX Installation & Maintenance

SP3361

Online course

This online course teaches students the required SYSTIMAX termination and testing best practices and procedures. Allows approved Partner students to register projects for SYSTIMAX warranty.

  • Estimated study time: 9 hours 40 minutes
  • Webcast duration: 6 hours 18 minutes
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
SYSTIMAX Installation and Maintenance - 'In House Training'

FC3361

FC course

This course is the Flexible Course (FC) version of the SYSTIMAX I&M (ND3361)that allows a student to be taught and qualified 'in-house' by a qualified instructor from within your own company.

Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
SYSTIMAX Installation and Maintenance Recertification

SP3361R

Online course

This is designed as an update course for students who have completed the online SP3361 or classroom-based ND3361. Developed specifically with technicians in mind, to ensure any updates to products, termination methods or standards are included.

  • Estimated study time: 7 hours 15 minutes
  • Webcast duration: 3 hours 50 minutes
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
Installing Premises Cabling Systems NETCONNECT ACT I

ND3801

Classroom course

This classroom based NETCONNECT certification course teaches the latest installation and termination techniques to support the solution to ACT I level. If you prefer to take this course online or it is unavailable locally, refer to the SP3801.

Course IconSmall BICSI icon
Course Icon
Installing Premises Cabling Systems ACT I

SP3801

Online course

This course covers installing premises cabling systems for the CommScope NETCONNECT and UNIPRISE range of both copper and fiber products, including transmission basics, installation and termination and applicable standards.

  • Estimated study time: 7 hours
  • Overall content duration: 6 hours 20 minutes
Course IconSmall BICSI iconSmall CommScope passport iconSmall ACT passport icon
Course Icon
Installation Recertification Training ACT I

SP3801R

Online course

This CommScope online installation training course is for those students that require re-certification of ACT I within 3 years. The course includes the latest update material to support successful solution installation.

  • Estimated study time: 4 hours 15 minutes
  • Overall content duration: 3 hours 50 minutes
Course IconSmall BICSI iconSmall CommScope passport iconSmall ACT passport icon
Course Icon
Certifying and Troubleshooting Premises Cabling Systems NETCONNECT ACT II

ND3802

Classroom course

This NETCONNECT certification course teaches how to certify the performance of installed premises cable plants to ACT II level in a classroom. If you prefer take this course online, or it is unavailable as a class locally, refer to the SP3802.

Course IconSmall BICSI icon
Course Icon
Certifying and Troubleshooting Premises Cabling Systems ACT II

SP3802

Online course

This CommScope ACT II course looks at field testing equipment for the verification of cabling installation/performance for both copper and fiber including test procedures and analysis in buildings / data centers.

  • Estimated study time: 5 hours
  • Overall content duration: 4 hours 10 minutes
Course IconSmall BICSI iconSmall CommScope passport iconSmall ACT passport icon
Course Icon
Designing Premises Cabling Systems NETCONNECT ACT III

ND3803

Classroom course

This NETCONNECT certification course teaches you how to Design Premises Cabling to ACT III level in a classroom environment. If you prefer take this course online, or it is unavailable as a class locally, refer to the SP3000.

Course IconSmall BICSI icon
Course Icon
Fiber Optic Infrastructure Specialist

SP4420

Online course

The Fiber Optic Specialist Course is designed to provide a comprehensive overview of fiber optic infrastructure transmission, construction, planning, installation and inspection and testing.

  • Estimated study time: 7 hours 30 minutes
  • Overall content duration: 7 hours
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
FiberGuide Fundamentals, Products & Positioning

SP4810

Online course

An introduction to the FiberGuide cable raceway system, primarily used in DCs and large network rooms.

  • Estimated study time: 50 minutes
  • Overall content duration: 40 minutes
Course IconSmall CommScope passport icon
Course Icon
FiberGuide Raceway System Design & Tools

SP4820

Online course

Best practice and advice on the design of FiberGuide Raceways, including the Design Pro Application.

  • Estimated study time: 45 minutes
  • Overall content duration: 30 minutes
Course IconSmall CommScope passport icon
Course Icon
FiberGuide Raceway Installation

SP4830

Online course

A detailed look at the installation of key components of the FiberGuide Raceway System.

  • Estimated study time: 1 hour
  • Overall content duration: 53 minutes
Course IconSmall CommScope passport icon
Course Icon
Powered Fiber Cable System Fundamentals

SP4910

Online course

An introduction to the Powered Fiber Cabling Systems designed for powering devices remotely over large campuses

  • Estimated study time: 45 minutes
  • Overall content duration: 31 minutes
Course Icon
Course Icon
Powered Fiber Cable System Design

SP4920

Online course

This course looks at how to design and create a BOM for the Powered Fiber Cabling Systems that allows powering of remote devices over large campuses.

  • Estimated study time: 45 minutes
  • Overall content duration: 35 minutes
Course Icon
Course Icon
Powered Fiber Cable System Installation

SP4930

Online course

This course has been designed to detail how the Powered Fiber Cable System is installed, terminated and maintained.

  • Estimated study time: 1 hour 40 minutes
  • Overall content duration: 1 hour 20 minutes
Course Icon
Course Icon
SYSTIMAX Certified imVision Support Specialist

GL5555

Online course

This course covers the installation and configuration of the SYSTIMAX imVision Solution. It includes the SMv9.1 System Manager software. It is the base requirement of the Certified imVision Support Specialist program.

  • Estimated study time: 20 hours
  • Webcast duration: 8h 5m
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
imVision Support Specialist Recertification

GL5555R

Online course

This is the recertification process for the GL5555 Certified imVision Support Specialist (CISS).

  • Estimated study time: 1 Day
  • Overall content duration: 2 hours
Small CommScope passport icon
Course Icon
SYSTIMAX Certified imVision Support Specialist
Course Registration

ND5555

Classroom course

Productive Lines, the imVision Authorized Training Partner, offer a number of options for students who would prefer some live instructor support to complete the GL5555. Click here to transfer to their website to view.

Course Icon
Course Icon
SYSTIMAX Sales Solutions

SP5602

Online course

This course is designed to help you understand SYSTIMAX solutions and how they can help customers meet their needs and solve their problems and help you sell SYSTIMAX solutions more effectively.

  • Estimated study time: 5 hours
  • Webcast duration: 2h:34m
Course IconSmall BICSI icon
Course Icon
Cabling for Smart Buildings

SP7700

Online course

This course looks at the advancing trend of intelligent buildings and the necessary cabling to cover the requirements for Building Automation Systems (BAS).

  • Estimated study time: 8 hours 30 minutes
  • Overall content duration: 7 hours 50 minutes
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
CommScope Security Design and Engineering

SP7710

Online course

This design course focuses on current security and access control (SAC) systems, technology, standards, architectures and methodologies and the CommScope products that support them.

  • Estimated study time: 5h
  • Webcast duration: 4h:01m
Course IconSmall CommScope passport icon
Course Icon
Propel Product Fundamentals

SP8410

Online course

An introduction to the CommScope Propel fiber connectivity products including connectors, panels, modules, adapters and cable assemblies.

  • Estimated study time: 30 Minutes
  • Overall content duration: 30 Minutes
Small CommScope passport icon
Course Icon
Propel Datacenter Connector Fundamentals

SP8412

Online course

An introduction to the CommScope fiber optic connectors available in the Propel connectivity solution.

  • Estimated study time: 40 Minutes
  • Overall content duration: 36 Minutes
Small CommScope passport icon
Course Icon
Propel Datacenter Technology Fundamentals

SP8414

Online course

An overview of the transceiver and switch technology that are driving the need for infrastructure solutions like the Propel solution.

  • Estimated study time: 1 hour 40 minutes
  • Overall content duration: 1 hour 30 minutes
Small CommScope passport icon
Course Icon
Propel Design

SP8420

Online course

Design and planning considerations for DC connectivity implementations, including the Propel solution.

  • Estimated study time: 1 Hour
  • Overall content duration: 1 Hour
Small CommScope passport icon
Course Icon
Propel Installation

SP8430

Online course

Installation practices for the propel panel solution including identification of the different fiber connector types.

  • Estimated study time: 45 Minutes
  • Overall content duration: 37 Minutes
Small CommScope passport icon
Course Icon
Pre Terminated Data Center Solutions

SP8850

Online course

The SP8850 course covers Data Center infrastructure technology, design, installation and architecture. Learn to provide resilient cabling platforms that can be upgraded to meet new and emerging higher speed technologies using MPO and duplex fiber

  • Estimated study time: 10 hours 30 minutes
  • Webcast duration: 8 hours
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
Hyperscale/Cloud Data Center Product & Installation Training

SP8910

Online course

Includes fiber connectivity products typically used in the Hyperscale and Cloud environments as well as details on fiber connectivity installation techniques.

  • Estimated study time: 2 hours 50 minutes
  • Webcast duration: 1 hour 17 minutes
Course IconSmall BICSI iconSmall CommScope passport icon
Course Icon
Infrastructure Solutions for Broadband Applications

SP1000

Online course

This course focuses on Broadband Infrastructures including FTTx, HFC, PON and copper based solutions, and takes a detailed look at infrastructure fundamentals, architectures and solutions for FTTx.

  • Estimated study time: 9 hours
  • Overall content duration: 6 hours 41 minutes
Course IconSmall BICSI iconSmall SCTE iconSmall CommScope passport icon
Course Icon
Microwave Radio Antenna Link Fundamentals

SP6105

Online course

This course covers the fundamentals of microwave transmission, microwave theory, microwave antenna selection and systems installation. This course replaces the classroom course previously held by the Andrew Institute.

  • Estimated study time: 4 hours
  • Overall content duration: 3 hours 5 minutes
Course IconSmall CommScope passport icon
Course Icon
Fiber to the Antenna (FTTA)

SP6170

Online course

This course will provide a solid and detailed overview of Fiber optic technology, CommScope's relevant fiber solutions, fiber theory, installation and testing to support the move towards FTTA.

  • Estimated study time: 6 hours 10 minutes
  • Overall content duration: 5 hours 35 minutes
Course IconSmall CommScope passport icon
Course Icon
Microwave Path Engineering Fundamentals

SP6700

Online course

Gain expertise in Microwave path engineering with a mix of both theory and real world examples. Covers basic elements of a microwave path, the role of propagation in design, the elements of good path design, regulatory considerations and more.

  • Estimated study time: 5 hours 30 minutes
  • Webcast duration: 2 hours 37 minutes
Course Icon
Course Icon
Microwave Path Design

SP6710

Online course

A comprehensive microwave design certification course developed in collaboration with George Kizer, a pioneer and subject matter expert in the field of microwave design and author of Digital Microwave Communication.

  • Estimated study time: 4 hours 30 minutes
  • Overall content duration: 3 hours 50 minutes
Course Icon
Course Icon
Residential/MDU Cabling Solutions

WR9100

Online course

The Residential & MDU (Multi Dwelling Units) Cabling Solutions course introduces the residential marketplace, applications, cabling products and installation.

  • Estimated study time: 4 hours 40 minutes
  • Overall content duration: 4 hours 12 minutes
Course Icon
Course Icon
CommScope imVision Controller X

WR9551

Online course

This course introduces the imVision Controller X hardware, how it works with ipatch panels and integrates with imVision system manager software.

  • Estimated study time: 1 hour
  • Overall content duration: 46 minutes
Course Icon
Course Icon
Documenting Campus Connections with imVision

WR9552

Online course

This course is a tutorial on how to document campus and outside plant connections with imVision system manager software.

  • Estimated study time: 18 minutes
  • Overall content duration: 17 minutes
Course Icon
Course Icon
Introduction to Smart Cities & Buildings

WR9701

Online course

The objective of this course is to understand the trends in technology associated with what are known as smart cities, campus or buildings.

  • Estimated study time: 25 minutes
  • Overall content duration: 22 minutes
Course Icon
Course Icon
Cabling for PoE

WR9703

Online course

The objective of this course is to understand how to use structured cabling to support Power over Ethernet PoE.

  • Estimated study time: 45 minutes
  • Overall content duration: 41 minutes
Course Icon
Course Icon
Data Center Fit Sales Certification

SPDCSC

Online course

This course is recommended for Partner and CommScope staff positioning cabling solutions into data centers. Includes a comprehensive look at DC requirements, challenges and solutions.

  • Estimated study time: 9 Hours
  • Webcast duration: 7 Hours
Small BICSI iconSmall CommScope passport icon
Course Icon
imVision Webinar Q3-2019

imVQ3-2019-SP

Online course

This webinar focuses on imVision System Manager’s integration capabilities.

  • Estimated study time: 60 Minutes
  • Webcast duration: 34 Minutes
Course Icon
Course Icon
imVision Webinar Q4-2019

imVQ4-2019-SP

Online course

This webinar focuses on reporting capabilities in System Manager version 9.0.

  • Estimated study time: 50 Minutes
  • Webcast duration: 23 Minutes
Course Icon
Course Icon
imVision Webinar Q1-2020

imVQ1-2020-SP

Online course

This webinar focuses on several features implemented in System Manager 9.2 as a result of suggestions from customers and partners. It also includes information about the new re-certification program for the certified imVision specialists.

  • Estimated study time: 1 hour
  • Webcast duration: 34 Minutes
Course Icon
Course Icon
imVision Webinar Q2-2020

imVQ2-2020-SP

Online course

This webinar focuses on imVision in the world of IoT, plus GeoMap options, uplink ports and fiber array connectivity updates to System Manager software 9.2.

  • Estimated study time: 1 hour
  • Webcast duration: 34 Minutes
Course Icon
Course Icon
imVision Webinar Q3-2020

imVQ3-2020-SP

Online course

This webinar focuses on an overview of new capabilities that are included in System Manager v9.3 software.

  • Estimated study time: 1 hour
  • Webcast duration: 30 Minutes
Course Icon
Course Icon
imVision Webinar Q4-2020

imVQ4-2020-SP

Online course

This webinar focuses on several integration examples along with an overview and a discussion about a new intelligent fiber optic panel.

  • Estimated study time: 50 Minutes
  • Webcast duration: 24 Minutes
Course Icon
Course Icon
imVision Webinar Q1-2021

imVQ1-2021-SP

Online course

This webinar focuses on several new features that are included in the System Manager 9.4 software, ability for documenting the double-sided racks, capability to display a Rack view, Spaces view for panels and shelves and more

  • Estimated study time: 1 hour
  • Webcast duration: 35 Minutes
Course Icon
Course Icon
imVision Webinar Q2-2021

imVQ2-2021-SP

Online course

This webinar focuses on an integration that our imVision partner created with Amazon’s Alexa virtual assistance, how to use imVision SNMP trap feature for integration with Network Management software and several topics related to imVision hardware.

  • Estimated study time: 1 hour
  • Webcast duration: 30 Minutes
Course Icon
Course Icon
imVision Webinar Q3-2021

imVQ3-2021-SP

Online course

This webinar focuses on several new capabilities that have been added in the System Manager release 9.5, the intent for these new capabilities is to provide enhancements to user interactions with the System Manager and to provide better visualization

  • Estimated study time: 1 hour
  • Webcast duration: 40 Minutes
Course Icon
Course Icon
imVision Webinar Q4-2021

imVQ4-2021-SP

Online course

This webinar focuses on changes to imVision system (software version 9.6 and firmware version X.2.6) that makes it faster, more reliable, secure and easier to use by using Application Programming Interface (API) communication method.

  • Estimated study time: 1 hour
  • Overall content duration: 55 minutes
Course Icon
Course Icon
imVision Webinar Q1-2022

imVQ1-2022-SP

Online course

This webinar focuses on the brand new Propel system that was recently introduced and how imVision System Manager supports documenting this system.

  • Estimated study time: I hour
  • Webcast duration: 34 Minutes
Course Icon
imVision Webinar Q2-2022

imVQ2-2022-SP

Online course

This webinar provides a high-level overview of the 400G/800G technologies, MPO16 connectivity solutions that are available to support them and related System Manager capabilities.

  • Estimated study time: 1 Hour
  • Overall content duration: 1 Hour
Course Icon
imVision Webinar Q3-2022

imVQ3-2022-SP

Online course

This webinar introduces the new way for managing System Manager users via Active Directory Groups among other topics

  • Estimated study time: 1 Hour
  • Overall content duration: 1 Hour
Course Icon
imVision Webinar Q4-2022

imVQ4-2022-SP

Online course

This webinar focuses on demonstrating capatilites of the imVision Import Wizard and Export Tools for building and maintaining information in a database.

  • Estimated study time: 1 Hour
  • Overall content duration: 1 Hour
Course Icon
imVision Webinar Q1-2023

imVQ1-2023-SP

Online course

This webinar focuses on the release of System Manager 9.7, which expands fiber connectivity capabilities among other topics.

  • Estimated study time: 1 Hour
  • Overall content duration: 1 Hour